


Ships from Anthony, TX · local pickup available · (915) 886-7098
| Part number | OSC-234 |
|---|---|
| Condition | Used |
| Availability | In stock |
A charger gets replaced when the machine no longer charges, charges only at one cable angle, or the brick gets abnormally hot. Before buying one, check the port on the laptop: if the jack wobbles or the plug sits loose, the fault is the port on the board, not the adapter, and a new charger will not fix it.
Read the output line printed on the brick, for example 19.5V 3.33A, and match BOTH the voltage and the tip. Amperage may be equal or higher, never lower. The wrong tip diameter is the single most common mistake, and the wrong voltage will damage the board.
Nothing to fit. Plug it in. If the machine still will not charge with a known good adapter, the next suspects are the DC jack, the charging circuit, or the battery itself.
Would rather not do it yourself? We fit parts like this on the bench at 816 Franklin St A, Anthony, TX 79821. See charging port and power repair, or call (915) 886-7098 and describe the fault before you buy anything. Diagnostic is $119.95, credited against the repair.
Match the part number printed on your existing unit to OSC-234. Apple and most laptop makers used several different parts in the same chassis and across left/right positions, so the model number of the laptop alone is not enough — go by the part number.
Used. Every photo on this page is of the actual item you receive, not a stock image.
Working units carry a 30-day store warranty. Items sold as-is or for parts are not covered — the listing says which.
Yes. We are at 816 Franklin St A, Anthony, TX 79821. Call (915) 886-7098 and we will have it at the counter.